Convert Video - Convert video from one format to another (Updated Nov 2026)
Description
Convert Video is an ffmpeg-based batch video converter that lets you quickly reformat video files for
editing, playback or sharing. Queue individual files or whole folders, choose from a wide range of output
formats, adjust quality using simple presets or custom settings, change resolution and frame rate, and
optionally use GPU hardware acceleration where supported. Output files can be written alongside the source
or to a dedicated folder, and overwrite behaviour is fully configurable.
Before a batch runs, the tool estimates how long it will take and shows a confirmation summary. As it works,
the progress bar and status line show each file with a live percentage and ETA, you can cancel at any time,
and when it finishes a summary reports how many files converted, were skipped or failed — with an
Open Output Folder button to jump straight to the results. The converter uses ffmpeg and ffprobe,
which need to be present in the application folder; the status line confirms whether both were detected.
How to use
-
Add input files:
Click Browse Files to select one or more video files, or Add Folder to add every
supported video in a folder and its subfolders. You can also drag and drop files or folders into the
Input Files list. Duplicates are ignored automatically. Use Remove to delete selected
entries, or Clear All to start fresh.
-
Select the output format:
In the Format dropdown, choose the target container/format, such as:
MP4, AVI, MOV, MKV, WebM, FLV, WMV, MPEG, MPG, M4V, 3GP, 3G2, TS, M2TS, OGV, VOB, ASF, F4V, MXF, DV and
GIF (animated). MP4 is usually a good default for general playback and sharing.
-
Choose a quality preset or custom settings:
In Quality, select:
- High Quality (Slow) — best visual quality, slower encoding, larger files.
- Medium Quality (Balanced) — balanced quality and speed (recommended default).
- Low Quality (Fast) — smaller files and faster encoding, lower quality.
- Custom — reveals extra controls so you can dial in the encoding yourself:
Encoding Preset (ultrafast … veryslow), CRF Value (0–51, lower = higher
quality), Video Bitrate (Mbps) and Audio Bitrate (Kbps).
The three named presets are tuned for typical use cases, so most people won't need Custom; the extra
controls appear only when Custom is selected.
-
Set resolution and frame rate:
In Resolution, choose:
- Keep Original — keep the source resolution.
- 480p, 720p (HD), 1080p (Full HD), 1440p or 4K (2160p) — the number is the shorter side. A wide video at 720p becomes 1280 × 720; an upright phone video becomes 720 × 1280, so it keeps its shape. A video that is already smaller isn’t enlarged.
In Frame Rate, choose:
- Keep Original — preserve the source frame rate.
- Common options such as 23.976 fps, 24 fps, 25 fps,
29.97 fps, 30 fps, 50 fps or 60 fps.
Lower resolutions and frame rates reduce file size and encoding time; higher values preserve more detail and smoothness.
-
Select hardware acceleration (optional):
In Hardware Acceleration, choose:
- None (CPU only) — use software encoding.
- NVIDIA NVENC — use supported NVIDIA GPUs.
- Intel Quick Sync — use compatible Intel integrated graphics.
- AMD AMF — use supported AMD GPUs.
Hardware acceleration can greatly improve encoding speed where supported by your hardware and drivers.
-
Configure output location and overwrite behaviour:
In the Output section:
- Tick Same folder as source file to save converted videos beside their originals.
- Or leave this unticked and specify an Output Folder using Browse to send
all output files to a central location.
- Tick Overwrite existing files if you want to replace any files with the same name
in the output location; leave it unticked and any file that already exists is skipped rather than
replaced.
-
Convert:
Confirm that ffmpeg and ffprobe are detected in the status line (for example “Ready. FFmpeg and FFprobe
detected.”), then click Convert. The tool first estimates how long the batch will take and shows a
confirmation summary — the number of files, estimated time, output folder, and your overwrite choice.
Click Yes to start. The Progress bar and status text show each file with a live percentage and
ETA, and you can click Cancel to stop the batch at any time (this halts the current encode straight away).
When it finishes, a summary reports how many files converted, were skipped and failed, and the
Open Output Folder button becomes available to jump straight to your converted videos.
Why you would use each option:
-
Format selection: Ensure compatibility with target devices or platforms (for example MP4
for general use, WebM for web delivery, or WMV/AVI for legacy workflows), or export an animated GIF.
-
Quality presets vs Custom: Presets provide easy, predictable trade-offs between quality,
size and speed; Custom gives you direct control over the encoding preset, CRF and video/audio bitrates.
-
Resolution and frame rate: Downscaling or lowering frame rate compresses files and speeds
uploads, while keeping original values preserves detail for editing or high-quality viewing.
-
Hardware acceleration: Offloads encoding work to the GPU where possible, significantly
reducing processing time for large batches or high-resolution content.
-
Same folder vs dedicated output: Saving next to the source simplifies quick conversions;
a dedicated folder suits structured workflows, automation and large projects.
-
Overwrite existing files: Useful when re-running a conversion with better settings,
but best left off when you want to preserve previous outputs — existing files are simply skipped instead.
Ready-made choices, a file-size limit, and just the sound
Ready-made choice: pick
Phone or tablet,
Email (720p, under 20 MB),
Messaging apps (480p, under 16 MB),
Website or YouTube or
Sound only (MP3), and the settings are filled in for you. Change any of them afterwards and the choice goes back to
Choose one….
Keep each file under: tick it and type a size in MB (1,000 MB is about 1 GB). The tool works out how much picture detail fits in that size for the video’s length, and if the result still comes out too big it tries again a little smaller, up to three times. If a video is too long to fit at a watchable quality, it says so — choose a bigger size or a lower resolution.
Sound only: MP3 (sound only) and
M4A (sound only) in
Format keep just the sound track.
Example: a 12-second, 35 MB test video with
Keep each file under 2 MB and 720p came out at 1.9 MB.
What to expect: videos are converted one after another (each one already uses the whole processor). Two videos with the same name, like
holiday.mov and
holiday.avi, give
holiday.mp4 and
holiday (2).mp4. Every choice is remembered for next time. Files that fail are listed at the end with the reason in plain words.
If something doesn’t work: this PC’s graphics card can’t do NVIDIA encoding (or Intel / AMD) — set
Hardware Acceleration to
None (CPU only).
the file is damaged, unfinished (still downloading?)… — wait until the download finishes, or try another copy.
Run it automatically with Watch and Process
Have every video that arrives in a folder converted — for example phone videos turned into MP4s that play on any TV or PC — without opening this window.
How to set it up:
1. Open
Watch and Process Automation, type a
Task Name and pick the
Watch Folder with
Browse… — the folder your files arrive in.
2. In
File Types type the video types, for example
*.mov, *.mp4, *.avi.
3. Click
Add FW Tool…, choose
Convert Video and choose
Convert to (
MP4 plays almost everywhere), the
Picture size (keep it, or limit it to 1080p, 720p or 480p to make files smaller), the
Quality (
Good is recommended), whether to
Remove the sound, and where to
Save the result. The line
What this step will do at the bottom of the window sums up your choices. Click
OK.
4. Click
Add Task, select the task and click
Start Watching. From now on every new file is handled within a few seconds, while the Watch and Process window is open (it can be minimised).
Example: iPhone videos copied into
Videos\From Phone are .mov files. With this step set to
MP4,
HD (720p) at most and
Good, a 2-minute
Birthday.mov becomes a much smaller
Birthday.mp4 beside it, ready to send or play on the TV.
Good to know: Video takes longer than other steps — a long video can take several minutes, and the next file waits until it's finished. The picture is only ever made smaller, never stretched, and keeps its shape.
Stop Watching stops a conversion part-way and removes the unfinished file. Files that are damaged or still downloading show "ffmpeg couldn't convert this file" in the log.
What You Can Do With This Program
Potential Uses for Convert Video Tool:
- Device Compatibility: Convert videos to formats compatible with smartphones, tablets, smart TVs, and gaming consoles.
- Editing and Production: Prepare source material for video editing software by converting to the required file type.
- File Size Optimization: Compress or format videos for faster sharing, streaming, or uploading to websites and social media — lower the resolution, frame rate or bitrate to hit a size target.
- Archiving and Backup: Standardize your video library in high-quality, future-proof formats for long-term storage.
- Multimedia Projects: Convert videos for presentations, e-learning platforms, marketing materials, or content creation tasks — or turn a short clip into an animated GIF.
- Batch Processing: Efficiently convert multiple files or whole folders at once to prepare large collections for publishing, teaching, or archives, with hardware acceleration to speed things up.
- Cross-Platform Sharing: Ensure videos are playable on different platforms and operating systems by converting to universal formats.
- DVD and Blu-ray Authoring: Make videos ready for burning to DVD or Blu-ray by converting to the appropriate standards.