Convert Audio - Convert audio from one format to another (Updated Nov 2026)
Description
Convert Audio is a fast, batch audio converter. You can mix and match input formats, choose the output format, pick from quality presets or set a custom bitrate and sample rate, and control the number of channels. Optional volume normalisation keeps output levels consistent across files. The tool supports drag-and-drop, multiple input files or whole folders, and flexible output options so you can keep converted audio alongside the source or in a separate folder.
WAV, AIFF and MP3 conversions run natively and always work. The wider range of formats — FLAC, ALAC, OGG, OPUS, WMA, AC3 and the rest — and volume normalisation use the ffmpeg engine included with the app; the status line confirms it was found, so every format is ready to use. Before a batch runs, the tool estimates how long it will take and shows a confirmation summary, you can cancel mid-way, and when it finishes an
Open Output Folder button takes you straight to the results.
How to use
-
Add input files:
Use Add Files to select one or more audio files, or Add Folder to scan a folder
(including its subfolders) and add every supported audio file it finds. You can also drag and drop
files or whole folders directly into the Input Files list. Duplicate files are ignored
automatically, and a line beneath the list shows how many files are selected. Use Remove to take
selected entries out of the list, or Clear All to start again.
-
Choose the output format:
In the Format dropdown, select the target format for all selected files (MP3 is the default).
Options include: WAV (PCM), AIFF, FLAC, M4A (ALAC), TrueAudio (TTA), WavPack (WV), MP3, AAC, M4A (AAC),
OGG Vorbis, OPUS, WMA, AC3, MP2, WebM Audio, MKA (Matroska) and Speex (SPX), depending on installed
codec support. When you pick a lossless format, the bitrate and quality-preset controls hide
automatically, since they don't apply.
-
Select a quality preset or custom settings:
In Quality Preset, pick:
- Low (64 kbps) — small files, lower quality.
- Standard (128 kbps) — balanced size and quality.
- High (192 kbps) — higher quality for music and voice (the default).
- Very High (320 kbps) — maximum quality for lossy formats.
- Custom — enter your own Bitrate (kbps) and Sample Rate (Hz).
Choosing a preset fills in the bitrate and sample rate for you; adjusting either value by hand switches
the preset to Custom so you can match specific requirements (for example 256 kbps at 48000 Hz).
-
Set channel configuration:
In Channels, choose:
- Auto (keep source) — preserve the original channel layout.
- Mono (1 ch) — downmix to mono for voice recordings or bandwidth savings.
- Stereo (2 ch) — ensure output is stereo even if input varies.
-
Normalise volume (optional):
Tick Normalize Volume to adjust output levels so that converted files are consistent in loudness.
This is useful when batch converting files from multiple sources with different volumes. (Normalisation
uses ffmpeg, so it requires ffmpeg to be available.)
-
Choose output location and overwrite behaviour:
In the Output section:
- Same folder as source file — save converted files next to their originals.
- Or clear this and specify an Output Folder, then click Browse to select a
dedicated output directory.
- Tick Overwrite existing files if you want to replace any existing files with the same
name in the output location; leave it unticked and any file that already exists is skipped
rather than replaced.
-
Convert:
Confirm that ffmpeg is detected in the status line (for example “Ready. ffmpeg detected — all formats
available”), then click Convert. The tool first estimates how long the batch will take and shows a
confirmation summary — the number of files, estimated time, output folder, and your overwrite and normalise
choices. Click Yes to start. The Progress bar and status text show which file is being
converted, and you can click Cancel to stop the batch at any time. When it finishes, a summary shows how
many files were converted, skipped and failed, and the Open Output Folder button becomes available to jump
straight to your converted audio.
Why you would use each option:
-
Format selection: Convert legacy or mixed audio collections into a single standard
format (for example MP3 or FLAC) for easier playback, editing and distribution.
-
Quality presets vs custom: Presets provide quick, sensible defaults for common use cases,
while Custom allows precise control when targeting specific streaming, storage or editing requirements.
-
Bitrate, sample rate and channels: Higher bitrates and sample rates preserve more detail
for critical listening, while lower settings and mono save space and bandwidth for voice, podcasts or
long recordings.
-
Normalize Volume: Ensures consistent perceived loudness across files from different
sources so you aren't constantly adjusting volume between tracks.
-
Same folder vs dedicated output: Keeping output next to source simplifies quick one-off
conversions; using a dedicated output folder is better for large batch jobs and scripted workflows.
-
Overwrite existing files: Helpful when re-running a conversion with improved settings,
but safer to leave off when you want to keep original conversions intact — existing files are simply
skipped instead.
Take the sound out of a video
1. Click
Add Files… and pick the video (MP4, MOV, MKV, AVI, WMV, M4V, WebM and more), or drag it onto the list.
2. Choose a
Format — MP3 plays everywhere, FLAC keeps every bit of the sound.
3. Click
Convert. You get a sound file with the video’s name, for example
party.mp3 from
party.mov; the video isn’t changed.
What to expect: up to four files are converted at the same time. Two files with the same name from different folders give
song.flac and
song (2).flac. Every choice in the window is remembered for next time, and new files are listed in the
Change Journal. A file that fails is listed at the end with the reason in plain words, for example
the file is damaged, unfinished (still downloading?) or isn’t really this type of file.
If something doesn’t work: the file has no sound to convert — the video was recorded without sound.
Windows didn’t allow writing there — choose another output folder.
Run it automatically with Watch and Process
Have every audio file that arrives in a folder converted — or the sound taken out of every video — without opening this window.
How to set it up:
1. Open
Watch and Process Automation, type a
Task Name and pick the
Watch Folder with
Browse… — the folder your files arrive in.
2. In
File Types type the audio types, for example
*.m4a, *.wav (add video types such as
*.mp4 to take the sound out of videos).
3. Click
Add FW Tool…, choose
Convert Audio and choose
Convert to (MP3 plays on everything; FLAC and WAV keep every bit of quality), the
Quality for MP3, M4A and OGG (192 kbps is good for music, 128 kbps is plenty for speech), and where to
Save the result. The line
What this step will do at the bottom of the window sums up your choices. Click
OK.
4. Click
Add Task, select the task and click
Start Watching. From now on every new file is handled within a few seconds, while the Watch and Process window is open (it can be minimised).
Example: Voice memos from your phone (.m4a) saved into
Music\Voice Memos become MP3s for an older player:
Meeting notes.m4a gets a
Meeting notes.mp3 beside it. Or watch
Videos\Talks for
*.mp4 and get an MP3 of each talk to listen to on the go.
Good to know: Files already in the chosen type are skipped. Song details (title, artist) are kept where the new type supports them. Converting to MP3, M4A or OGG can't add quality that wasn't there — choose FLAC if you want an exact copy that is smaller than WAV.
What You Can Do With This Program
Potential Uses for Convert Audio Tool:
- Music Library Management: Standardize your audio collection by converting files to consistent formats for use on all your devices — add a whole folder and its subfolders in one go.
- Podcast and Media Production: Prepare audio clips and tracks for editing, mixing, or distribution in the ideal format for your workflow, and normalise levels across a mixed set of recordings.
- Device Compatibility: Convert files to ensure they play smoothly on various smartphones, MP3 players, or car audio systems.
- Archiving and Backup: Create high-quality archives in lossless formats (like WAV, FLAC or ALAC) from compressed originals.
- File Size Reduction: Convert audio files to compressed formats (such as MP3, OGG or OPUS) to save storage space and speed up sharing.
- Ringtone and Alert Creation: Transform audio snippets into formats compatible with phones or apps for custom ringtones and notifications.
- Educational and Language Tools: Convert recorded lectures, language lessons, or audiobooks into manageable, portable formats — downmix to mono to save space on long recordings.
- Sharing Across Platforms: Ensure files meet upload requirements for platforms or websites by converting them to supported types.